A Facile Room Temperature Synthesis of Zinc Oxide Nanostructure and Its Influence on the Flame Retardancy of Poly Vinyl Alcohol

In this work, poly vinyl alcohol–ZnO nanocomposites were synthesized via two different in situ and ex-situ methods. In ex-situ, at first zinc oxide nanostructures were synthesized by one-step precipitation reaction between zinc acetate and sodium hydroxide. The effect of different surfactants such as poly vinyl pyrrolidone, poly vinyl alcohol and poly ethylene glycol on the morphology of ZnO nanostructures was investigated. Nanostructures were characterized by X-ray diffraction, scanning electron microscopy. The influence of ZnO nanostructures on the flame retardancy of the poly vinyl alcohol matrix was studied using underwriter laboratories UL-94 analysis.     

Sulfonic acid-functionalized Fe3O4-supported magnetized graphene oxide quantum dots: A novel organic-inorganic nanocomposite as an efficient and recyclable nanocatalyst for the synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives

In this research, the main emphasis has been focused on the preparation of a novel Fe₃O₄-supported propane-1-sulfonic acid-grafted graphene oxide quantum dots (Fe₃O₄@GOQD-O-(propane-1-sulfonic acid)) that it was readily synthesized via a five-step procedure as a hitherto unreported magnetic nanocatalyst. This newly prepared Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) nanocomposite was structurally well-established by different analytical techniques including Fourier transform infrared (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), thermal gravimetric analysis (TGA), field emission gun-scanning electron microscope (FESEM), high-resolution transmission electron microscopy (HRTEM) and vibrating sample magnetometer (VSM) analyses. The high catalytic performance of this nanocomposite was exhibited in one-pot synthesis of dihydropyrano[2,3-c]pyrazole and 4H-chromene derivatives under mild conditions. Low reaction times, excellent yields of the products, benignity of the catalyst, easy reaction work-up and magnetic recyclability of the catalyst are the main advantages of the present protocol. Also, our research indicated that the Fe₃O₄@GOQD-O-(propane-1-sulfonic acid) could be reused up to five times without considerable loss of catalytic activity.     

Assessment of nanocomposites based on unsaturated polyester resin/nanoclay under impact loading

The aim of this study is to investigate the performance of nanoclay reinforced unsaturated polyester (UP) resin under impact loads. Nanocomposite specimens containing nanoclay in 0, 1.5, and 3 (wt%) were prepared by melt mixing method. X‐ray diffraction, transmission electron microscopy analysis, scanning electron microscope photographs, and viscosity changes in liquid state resin confirmed exfoliation and intercalation of the nanoclay in the UP resin system used. Tensile modulus showed an increase with increase in nanoclay content. However, the tensile strength and elongation at break exhibited reducing performance with increase in nanoclay content. Izod impact test results indicated better performance for the specimens containing nanoclay reinforcements, with 1.5 (wt%) of nanoclay specimens showing the highest value. High velocity impact tests were carried out using gas gun in velocity range of 20–100 m/sec and harden steel hemispherical tip projectile with diameter of 8.7 mm and weight of 11.54 g. Results for high velocity impact test indicated better performance by the specimens containing nanoclay, with 1.5 (wt%) nanoclay showing the highest attained value. Damage assessments of impact area for all specimens showed spalling type brittle failure with punch out and sever fragmentation pattern. Copyright © 2011 John Wiley & Sons, Ltd.     

Estimation of concrete compressive strength by a fuzzy logic model

Concrete mix design is a process of proportioning the ingredients in right proportions. The aim of this study is to design a fuzzy logic model for determination of the compressive strength of a concrete. The datasets which have been loaded into a fuzzy logic model contain 1,030 concrete mixtures. Input fields of the fuzzy expert system are weight percent of cement, water, blast furnace slag, fly ash, super plasticizer, fine aggregate, coarse aggregate, and age of the concrete. Output field is concrete compressive strength. Finally, 897 rules used for this fuzzy logic modeling.     

Acidified,Wet, Silica-Supported Tetrabutylammonium Periodate: A Convenient and Mild Reagent for Conversion of Thioamides to Their Corresponding Amides Under Solvent-Free Conditions

A series of thioamides are transformed to their corresponding oxo analogues in good to excellent yields with acidified, wet, silica-supported tetrabutylammonium periodate under solvent-free conditions.     

Preparation of an experimental glass-ionomer cements and evaluation of their properties

The preparation of glass-ionomer cements based on the composition of SiO₂–Al₂O₃–CaO–SrO–F and evaluation of their properties is described. Cements were prepared via the sol–gel method and characterized by XRD, BET, SEM, and EDAX analysis. The effect of various concentrations of Sr on in vitro bioactivity of the glass speciments was investigated. In vitro bioactivity of the samples was evaluated by soaking them in simulated body fluid followed by structural characterization using SEM and atomic absorption analysis. A glass specimen with 0.5 mol of Sr exhibited appropriate bioactivity.     

Study of kinetic,thermodynamic, and isotherm of Sr adsorption from aqueous solutions on graphene oxide (GO) and (aminomethyl)phosphonic acid–graphene oxide (AMPA–GO)

Journal of Radioanalytical and Nuclear Chemistry - In this work, graphene oxide (GO) and (aminomethyl)phosphonic acid–Graphene oxide (AMPA–GO) adsorbents were prepared by the modified...     

Kinetics and thermodynamics of uranium ion adsorption from waste solution using Amberjet 1200 H as cation exchanger

The present work deals with the adsorption of uranium from a nitric acid waste solution using the cation exchange resin Amberjet 1200 H (AHR) . Batch experiments were performed in order to assess the performance of AHR in uranium adsorption. The influences of pH, contact time, initial uranium concentration and temperature have been enhanced. The physical parameters including the adsorption kinetics, the isotherm models and the thermodynamic data have also been determined to determine the nature of the uranium adsorption by AHR. The studied resin has been agreed with both the pseudo second order reaction and Langmuir isotherm.